fbpx
skip to Main Content

Select the D-25 flashing that matches your roof

Select the distance you need

Measure the drop from the inside of your roof down to the point in the ceiling that you want the diffuser to be located. The illustration below shows how to measure the distance from the roof to the ceiling to determine the length of system required.

Our extension tubes come in units of 200/300/400 and 600mm so please round your measurement up to the nearest 100mm and we will calculate the best combination for you.

For example: 1725mm specify 1800mm.

Solarspot measure extension distance

Slate Parallel

D-25 Parallel Slate Flashing

D-25 Parallel Slate Flashing – black

For all slate or wooden shingle roofs with a pitch of 24 degrees or less. Can be used on east and west facing roofs up to 30 degrees and south-facing roofs up to 40 degrees.

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip.

Base: 650 x 780mm (width x depth), turret 100mm high.

Dimensions are approximate and for guidance only.

Slate Angled

D-25 Angled Slate Flashing

D-25 Angled Slate Flashing – black

For all slate or wooden shingle roofs with a pitch of 24 degrees more.

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip.

Base: 650 x 780mm (width x depth), turret 150mm high.

Dimensions are approximate and for guidance only.

Versatile Parallel

D-25 Parallel Versatile Flashing

D-25 Parallel Versatile Flashing – black

Parallel versatile roof flashing in terracotta for all interlocking tiles; plain or profiled, roofs, plain tiles, pantiles, Rosemary tiles etc., with a pitch of up to 24 degrees. Can be used on east and west facing roofs up to 30 degrees, and south-facing roofs up to 40 degrees.

Construction:

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip and expanded polyether foam edging for increased protection against driven rain, bird or insect ingress.

Base: 650 x 780mm (width x depth), turret 100mm high.

Dimensions are approximate and for guidance only.

Versatile Angled

D-25 Angled Flashing Versatile

D-25 Angled Versatile Flashing – black

For all interlocking tiles; plain or profiled, roofs, plain tiles, pantiles, Rosemary tiles etc., with a pitch of 24 degrees or more.

Construction:

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip and expanded polyether foam edging for increased protection against driven rain, bird or insect ingress.

Base: 650 x 780mm (width x depth), turret 100mm high.

Dimensions are approximate and for guidance only.

Terracotta Parallel

D-25 Parallel Flashing Terracotta

D-25 Parallel Versatile Flashing – terracotta

Parallel versatile roof flashing in terracotta for all interlocking tiles; plain or profiled, roofs, plain tiles, pantiles, Rosemary tiles etc., with a pitch of up to 24 degrees. Can be used on east and west facing roofs up to 30 degrees, and south-facing roofs up to 40 degrees.

Construction:

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip and expanded polyether foam edging for increased protection against driven rain, bird or insect ingress.

Base: 650 x 780mm (width x depth), turret 100mm high.

Dimensions are approximate and for guidance only.

Terracotta Angled

D-25 Angled Flashing Terracotta

D-25 Angled Versatile Flashing – terracotta

For all interlocking tiles; plain or profiled, roofs, plain tiles, pantiles, Rosemary tiles etc., with a pitch of 24 degrees or more.

Construction:

Vacuum-formed from fire-retardant ABS with self-adhesive EasyForm® weather strip and expanded polyether foam edging for increased protection against driven rain, bird or insect ingress.

Base: 650 x 780mm (width x depth), turret 100mm high.

Dimensions are approximate and for guidance only.

Back To Top
error: Content is protected !!